The analogue input records and processes analogue
sensor signals. Up to four analogue sensors
can be connected in any combination. In connection
with the analogue input module REG/4-gang,
8 analogue inputs are available, to which the connection is made using the sub-bus.

For installation on DIN rails EN 50022.
The bus is connected using a bus connecting terminal;
a data rail is not necessary.

Evaluation and limit value processing is performed
in the analogue input. With continuity checking of
the 4 ... 20 mA inputs.

Auxiliary voltage: AC 24 V (+/-10 %)
Analogue inputs: 4
Current interface: 0 ... 20 mA, 4 ... 20 mA
Voltage interface: 0 ... 1 V, 0 ... 10 V
Outputs: DC 24 V, 100 mA
Continuity checking: 4 ... 20 mA
Device width: 4 modules = approx. 72 mm

In KNX, to be completed with: Power supply REG, AC 24 V / 1 A, art. no. 663529.

Accessories: Analogue input module REG/4-gang, art. no.
682192. Wind sensor with 0-10 V interface, art. no. 663591. Wind sensor with 0-10 V interface and heating, art. no. 663592. Rain sensor, art. no. 663595. Brightness sensor, art. no. 663593: Twilight sensor, art. no. 663594: Temperature sensor, art. no. 663596.

Contents: With bus connecting terminal and cable cover.